health center

Best Slide Hammer Bearing Puller: An Easy Way To Remove Bearings

By James

A slide hammer bearing puller is a specialized tool that is used to remove bearings from a shaft. The tool consists of a housing with a threaded stud, onto which a cone-shaped bearing cup is attached. A slide hammer is then inserted into the housing and connected to the stud.

The slide hammer bearing puller is operated by first positioning the housing over the bearing to be removed. The slide hammer is then inserted into the housing and connected to the stud. The operator then grasps the handle of the slide hammer and pulls it back towards them, using their body weight to provide resistance. As the slide hammer is pulled back, it applies force to the stud, which in turn pushes on the bearing cup and pops the bearing off of the shaft.

The slide hammer bearing puller is a simple yet effective tool that can be used to remove bearings from a variety of different types of shafts. This tool is particularly useful for removing bearings from difficult-to-reach or hard-to-remove shafts, such as those in automotive applications.

Why Slide Hammer Bearing Puller Is Necessary?

A slide hammer bearing puller is a specialized tool that is used to remove bearings from their housing. This tool consists of a long handle with a weight on the end, which is attached to a sliding shaft. The shaft is inserted into the bearing housing and the weight is used to apply force to the shaft, causing it to slide out of the housing.

The major advantage of using a slide hammer bearing puller over other methods, such as prying or using a hydraulic press, is that it applies an even force over the entire surface of the bearing. This prevents damage to the bearing or its housing. Another advantage is that this method can be used on bearings that are difficult to access, such as those located in tight spaces.

Our Top Picks For Best Slide Hammer Bearing Puller

Best Slide Hammer Bearing Puller Guidance

Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

Check Price On Amazon

Orion Motor Tech’s 9-Way Slide Hammer Puller Set with 4 lb slide hammer is perfect for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents and other press-fit parts (bearings, bushings, gears, pulleys, etc). The set includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearings, gears and seals, 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs. The tool kit is built to last with rugged carbon steel alloy and chrome vanadium steel components and comes with a 1-year warranty and 100% free exchange if the product is defective.

Common Questions on Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

• What is the best way to use the Orion Motor Tech 9-Way Slide Hammer Puller Set?
The best way to use the Orion Motor Tech 9-Way Slide Hammer Puller Set is to follow the instructions included with the set.

Why We Like This

• The Orion Motor Tech 9 Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange type rear axles, most front wheel drive hubs, pulling dents, and other press fit parts (bearings, bushings, gears, pulleys, etc).
• Includes 2 jaw and 3 jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals
• 2 and 3 way cross blocks and cone type puller provide the perfect jaw configuration for most jobs.
• Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting.
• In order to provide a worry free shopping experience, we promise a 1 year warranty and 100% free exchange if the product is defective

Additional Product Information

Color Silver
Height 4.72 Inches
Length 23.62 Inches

Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS

Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS

Check Price On Amazon

If you’re looking for an easy-to-use, all-in-one solution for removing bearings and bushings, you’ll want to check out the Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit. This 116-piece set includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to handle parts from 1/4 to 2-1/3 inches in diameter. The heavy-duty construction is made to last, with AISI 1045 medium carbon steel construction and chromoly steel collets that can handle even the most stubborn parts. The wide application means you can use this set on a variety of vehicles, and the easy-to-use design means you can get the job done quickly and easily. When you’re finished, everything stores neatly in the included blow-molded case.

Common Questions on Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS

• What is the name of the company that makes this product?
Orion Motor Tech

• What is this product used for?
This product is used for removing bearings from a housing.

• What is included in this kit?
This kit includes a slide hammer, pilot insert, and internal bearing removal tool.

• How many pieces are in this set?
16

Why We Like This

• 1.AISI 1045 medium carbon steel forged and galvanized for long term durability
• 2.Chromoly steel collets for easy removal of stubborn blind bearings and bushings
• 3.Expandable collets and threaded screw adapters for a wide variety of vehicles
• 4.Easy to use slide hammer for most parts
• 5.Counterstay for more delicate operation
• 6.Custom blow molded case for easy storage and transport

Additional Product Information

Color Silver + Black
Height 4.72 Inches
Length 18.5 Inches
Weight 11 Pounds

Handor 9-Way Slide Hammer Puller Set Wheel Bearing Removal Tool, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

Handor 9-Way Slide Hammer Puller Set Wheel Bearing Removal Tool, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

Check Price On Amazon

A slide hammer puller is a tool that is used to remove automotive parts, such as when you are stripping down an old car, pulling dents on vehicles, or accessing other inaccessible objects that need to be struck for removal. For instance, automotive parts are sometimes housed inside other parts, such as a bearing inside a wheel hub, making the bearing inaccessible. A slide hammer can be used to remove the hub so that the bearing can be replaced.

The Handor 9-Way Slide Hammer Puller Set is a versatile and practical toolkit that can be used for a variety of pulling jobs, including removing a front wheel hub bearing, rear axle, gear, seal, or dent. The set includes a variety of attachments and configurations to suit different needs, and is designed to be durable and easy to use.

Common Questions on Handor 9-Way Slide Hammer Puller Set Wheel Bearing Removal Tool, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

• What is the use of a slide hammer puller set?

A slide hammer puller set is used to remove wheels bearings and hub assemblies.

• How do you use a slide hammer puller set?

To use a slide hammer puller set, first attach the body of the tool to the wheel bearing or hub assembly that you wish to remove. Then, insert the slide hammer into the body of the tool, and strike it with a mallet to drive the tool onto the bearing or hub. Finally, twist the handle of the tool to extract the bearing or hub from its location.

• What are the benefits of using a slide hammer puller set?

Slide hammer puller sets offer a number of benefits, including the ability to remove bearings and hubs without damaging the surrounding area, and the ability to quickly and easily remove multiple bearings or hubs at once.

• What are some tips for using a slide hammer puller set?

Some tips for using a slide hammer puller set include: making sure the tool is properly attached to the bearing or hub before striking it with the mallet, and using caution when twisting the handle of the tool to avoid stripping the

Why We Like This

• 1. Aids in removing automotive parts
• 2. Multi functional 9 way slide hammer
• 3. Suitable for various pulling jobs
• 4. Heavy duty and durable
• 5. Simple operation

THOROAD Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1″ to 2-7/8″ IDs

THOROAD Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1

Check Price On Amazon

The THOROAD Rear Axle Bearing Puller Tool Kit and Slide Hammer Set is a complete solution for quickly repairing body dents without removing the vehicle interior panels. The long handle increases the pulling space of the sliding hammer, making the hammer stronger and easier to use the tool in difficult-to-reach areas such as door panels, body side panels, fenders and roofs.

The Bearing Puller Adapters*3, 5% LB Heavy-Duty Slide Hammer*1, Bearing&Seal Removal Hook*1, Rugged 4-Point Axle Flange Yoke*1, Lock Nut*1 provide everything necessary to easily remove bearings and seals without damaging the surrounding area. The black plastic case ensures that the tools will stay organized and protected while in storage. The included color stickers and instructions make it easy to identify the correct tool for the job at hand.

The THOROAD Rear Axle Bearing Puller Tool Kit and Slide Hammer Set is forged from high-quality alloy steel, quenched at high temperature, quenched and hardened, not cracked, and durable. The Slide hammer set is easy to install, easy to use, and can be arbitrarily converted according to different usage scenarios.

The THOROAD Rear

Common Questions on THOROAD Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1″ to 2-7/8″ IDs

• What are the dimensions of the Thoroad Rear Axle Bearing Puller Tool Kit?

The dimensions of the Thoroad Rear Axle Bearing Puller Tool Kit are 1″ to 2-7/8″ IDs.

• How many pieces are included in the Thoroad Rear Axle Bearing Puller Tool Kit?

There are three pieces included in the Thoroad Rear Axle Bearing Puller Tool Kit.

• What is the weight of the Thoroad Rear Axle Bearing Puller Tool Kit?

The weight of the Thoroad Rear Axle Bearing Puller Tool Kit is 2.7 lbs.

• How do you use the Thoroad Rear Axle Bearing Puller Tool Kit?

The Thoroad Rear Axle Bearing Puller Tool Kit is used by attaching the slide hammer yoke to the rear axle housing, then inserting the appropriate adapter into the yoke. Next, you attach the slide hammer to the adapter and pull the handle to separate the axle shaft from the housing.

Why We Like This

• 1. Forged from high quality alloy steel
• 2. Quenched at high temperature
• 3. Quenched and hardened
• 4. Not cracked
• 5. Durable

Additional Product Information

Color Black
Height 120 Inches
Length 216 Inches
Weight 1 Pounds

GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D

GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D

Check Price On Amazon

This 10-way slide hammer puller set provides a wide range of puller applications, including flange-type axles, oil seals, and other press-fit parts. The jaws can be set up for 2- or 3-jaw internal or external pulling jobs. The 5-1/2 lb slide hammer has a 5/8-18 thread, and the yoke fits axles with 4, 5, or 6 studs in a circle from 4-1/2″ to 5-1/2″. This puller can be used to pull rear axles on cars and 1/2-ton trucks with flange-type axles. It comes with a durable blow mold storage case for tool retention and portability.

Common Questions on GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D

• What is the GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D?
The GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D is a set that includes a slide hammer and ten different jaws that can be used for a variety of different purposes, including removing dents, pulling out nails, and more.

• How is the GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D used?
The GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D is used by attaching the appropriate jaw to the slide hammer, then using the slide hammer to apply pressure to the desired area.

• What are the different jaws included with the GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D?
The different jaws included with the GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D are a flat head jaw, a hook jaw, a double hook jaw, a claw jaw, a pinch jaw, and a hub jaw.

• What are some of the things that the GEARWRENCH 10 Way Slide Hammer Puller Set – 41700D can be used for?

Why We Like This

• Provides a wide range of puller applications
• Jaws can be set up for 2 or 3 jaw internal or external pulling jobs
• 5 1/2 lb slide hammer has a 5/8 18 thread
• Yoke fits axles with 4, 5, or 6 Studs in a circle from 4 1/2″ To 5 1/2″
• Pulls rear axle on cars and 1/2 ton trucks with flange type axles

Additional Product Information

Color CHROME
Height 4.1 Inches
Length 23.6 Inches
Weight 0.330693393 Pounds

Benefits of Slide Hammer Bearing Puller

A slide hammer is a tool that helps you remove bearings without damaging the shaft. It is one of the best tools for removing hard-to-reach or stubborn bearings. The main advantage of using a slide hammer is that it evenly pulls on the bearing, making it less likely to damage the shaft. There are two types of slide hammers: manual and pneumatic. Manual slide hammers are operated by hand, while pneumatic ones use compressed air to function.

Buying Guide for Best Slide Hammer Bearing Puller

Are you looking for a quality slide hammer bearing puller? If so, you’ve come to the right place. In this buying guide, we’ll take a look at some of the best products on the market and give you all the information you need to make an informed purchasing decision.

First, let’s take a look at what a slide hammer bearing puller is and how it can be used. A slide hammer bearing puller is a tool that is used to remove bearings from shafts. It consists of a handle with a chuck on one end and a weight on the other end. The weight is attached to the handle with a chain or cord.

To use the tool, first, the chuck is placed over the bearing that needs to be removed. The weight is then lifted and released, striking the back of the housing. This action causes the housing to separate from the shaft and allows the bearing to be pulled out.

Now that you know what a slide hammer bearing puller is and how it works, let’s take a look at some of its key features:

-A heavy-duty construction that can withstand repeated use

-Adjustable pin widths in order to accommodate different size bearings

-A long handle for added leverage when removing bearings

-A built in storage compartment for holding extra bearings or other parts

Frequently Asked Question

What is the best slide hammer for bearing pullers?

There are a few different types of slide hammers that can be used for bearing pullers, but the best one to use is the type that has a long, thin shaft and a small head. This type of slide hammer is the best because it can reach into small spaces and is less likely to damage the bearings than a larger, heavier slide hammer.

What is the best way to use a slide hammer for bearing pullers?

There is no definitive answer for this question as it depends on the specific situation and equipment being used. Some general tips that may be helpful include: ensuring that the slide hammer is properly secured to the bearing puller before use, using slow and steady strokes when operating the slide hammer, and using caution to avoid damaging the surrounding area.

What are the benefits of using a slide hammer for bearing pullers?

There are many benefits to using a slide hammer for bearing pullers. Some of the benefits include: -They are very easy to use-They are very versatile and can be used for a variety of applications-They are very durable and can withstand a lot of wear and tear-They are very affordable and are a great value for the money

How does a slide hammer work for bearing pullers?

A slide hammer is a tool that is used to remove bearings from a shaft. It consists of a handle that is attached to a weight, which is then slid down the shaft. The weight of the slide hammer creates a force that is used to pull the bearing off the shaft.

What are the features of the best slide hammer for bearing pullers?

There are many features to consider when purchasing a slide hammer for bearing pullers. Some of the most important features to look for include: -A heavy-duty construction that can withstand heavy use -A comfortable grip that will allow you to use the tool for extended periods of time -A long handle that will give you plenty of leverage -A wide range of sizes to choose from, so you can find the perfect fit for your needs

Conclusion

Thank you for your time in considering our slide hammer bearing puller. This is an outstanding product that will provide years of trouble-free use. It is backed by our company’s reputation for quality and customer service. I believe you will find this to be the best value for your money.

Please let me know if you have any further questions or need more information. I would be happy to assist you further.

Thank you again, and I look forward to hearing from you soon.

Top